Hope-tech Direct Mount stem User Manual download pdf

WARRANTY:

All Hope Technology components are covered for two years from original date of purchase

against manufacturer defects in material and workmanship.

Proof of purchase is required. Products must be returned to the original place of purchase or to

Hope Technology to process any warranty claim. Please print and ll the “goods returned form”

found on the tech support section of our website should you wish to send a product back.

This warranty does not cover any damage caused through normal wear, mis-use or failing

to comply by the recommendations given. This warranty does not aect your statutory rights.

HOPE TECHNOLOGY

Hope Mill

Barnoldswick,

Lancashire

BB18 5PX, United Kingdom

BEFORE YOU START:

WARNING: Don’t overestimate your technical capacities. This stem must

be tted by a competent cycle mechanic using the correct tools. Incorrect

installation could result in loss of steering control that could cause serious

or fatal injuries.

• Ensure the handlebar clamp area is clean and dry (NO GREASE!)

• Remove all bolts from the stem and apply a small amount of grease

to the threads and under the head of the bolt.

PRODUCT SPECIFICATION:

• Compatible with: 2009 FOX40 forks and onwards.

All Rock Shox Boxxer forks. 2013 Marzocchi 888 and onwards.

All Marzocchi 380 forks.

• Handlebar clamp diameter : 31.8mm (oversize) only

• Bar position: 40 or 50mm reach - 18mm rise above upper crown top face

TOOL REQUIRED:

5mm allen key, torque wrench required.

NOTE:

• All bolts used in the crown are custom made for Hope.

• Do not use any lower strength bolts.

• Do not use shorter bolt length than the one specied here.

• Full thread engagement is required.

MAINTENANCE:

• Periodically check the hardware for tightness.

• Be careful not to over-tighten the bolts!

• Periodically regrease hardware using appropriate grease.

• Regulary inspect all parts of the stem for damage and cracks,

especially after any BIG CRASH!

NOTES:

50mm

40mm

[email protected] hopetech.com

40mm/50mm DIRECT MOUNT STEM

INSTALLATION GUIDE

[email protected] hopetech.com

1 2

Summary of Contents

Page 1 - INSTALLATION GUIDE

WARRANTY:All Hope Technology components are covered for two years from original date of purchase against manufacturer defects in material and workman

Page 2

STEP 4: When you are satised with the handlebar position and orientation, tighten rst the 2 top clamp bolts to 9-10 Nm. Alternate between the 2 bo

Hope-tech Direct Mount stem User Manual

Browse online or download User Manual for Sensors Hope-tech Direct Mount stem. Hope Tech Direct Mount stem User Manual

Summary of Contents

More documents for Sensors Hope-tech Direct Mount stem

Comments to this Manuals

Hope-tech Direct Mount stem User Manual

Browse online or download User Manual for Sensors Hope-tech Direct Mount stem. Hope Tech Direct Mount stem User Manual

Summary of Contents

More documents for Sensors Hope-tech Direct Mount stem

Comments to this Manuals

Related products and manuals for Sensors Hope-tech Direct Mount stem